October 16, 2006King, will I be able to do this to my 04 4runner sport .......
October 16, 2006I would think so.. I'd go off the instructions and see if the harness matches the description. If so, I'd pretty much guarantee it will work..
I think someone already pulled a link for the instructions, but if not, I'll do it.
October 16, 2006I've heard that the controller is above the glovebox instead and that the wire is yellow with a black stripe (on the new Tacomas, but probably the same on the new 4Runners). I also heard that just grounding it will not allow the locker to dis-engage. You would probably need to install a switch of some sort.
October 16, 2006are you speaking specifically about 4runners? Cuz, I haven't had any problems with mine.
December 16, 2006I'm going to check out your other forum. I am hoping it will work on my PreRunner, I have the same locker as well. Actually I have not tried to do donuts, but the book says the locker will only work under 5 mph. Has anyone had any experience with the locker in PreRunners?
December 16, 2006The locker should work at any speed, Toyota just says keep it under 5mph so you stay 'safe'. The pre-runners don't have a low range transper case right? If they don't, you wouldn't need to do this mod.